青岛中央除尘设备生产厂家同盛涂装

汽车烤漆房就是汽车喷烤漆房，因为其先对汽车进行喷漆，然后再将漆烤干。以前喷漆都是在室外进行的，用喷头来进行喷漆，这样喷漆质量是很低的，空间了有太多灰尘，会夹杂在一起喷在汽车上。工作人员会将漆雾吸入体内，对身体不好。于是，人们便发明了汽车喷漆房，其干净安全，效率高。

The car is the car paint spray paint room, because the first car paint, then paint dry. Spray paint was carried out outdoors before, and spray paint was done with sprinklers. The of painting is very low. There is too much dust in the space, and it will mix and spray on the car. The staff will inhale the paint mist in the body, not good for the body. So, people have invented the car painting room, it is clean, safe and efficient.

汽车喷烤漆房在喷漆时，先将外界的空气进行过滤，将一次过滤的空气送到房顶，在顶层的过滤网进行第二次过滤，Zui后将洁净的空气传送到操作间内。

When painting the car, the air filter is first filtered out, and the filtered air is sent to the roof. The top layer of the filter screen is filtered for second times, and finally the clean air is sent to the operation room.

在过滤过程中，已经将粉尘挡在了操作间外，不会对喷漆质量产生影响。二次过滤的空气在操作间内形成风幕，将喷漆产生的漆雾带走，从底部排出。这样漆雾也不会对工作人员产生危害了。

In the process of filtering, the dust has been kept out of the operation and will not affect the of the paint. The air in the two filter forms the air curtain within the operating room, and the paint spray produced by the spray paint is removed from the bottom. This paint fog will not be harmful to the staff.

汽车喷烤漆房喷漆结束后就要进行烤漆。烤漆过程中，室内温度持续升高，达到了55℃左右，外界的空间被持续引进，经过过滤后与室内的热器进行热交换，使室内空气逐渐升高。当温度达到了标准后，燃烧器就会停止。就这样很快就能将汽车喷漆烤干。

When the paint is finished, the paint will be done. During the paint baking process, the indoor temperature continued to rise, reaching 55 degrees Celsius, and the external space was continuously introduced. After filtration, heat exchange with the indoor heat exchanger increased indoor air gradually. When the temperature reaches the standard, the burner will stop. It will soon dry the car paint.

章丘市同盛涂装设备厂()，位于济南市东郊的章丘市辛寨镇驻地。公司企业法人侯祥平自1990年起从业在涂装行业。曾在华誉、金城、华丰、兴盛等多家烤漆设备厂，生产、安装、设计、销售和建厂。由此积累了专业经验和好多的朋友。
章丘市同盛涂装设备厂自正式注册成为独立法人企业时起，同步与业内老朋友单位达成了兄弟合作支持单位。并吸收了大量的专业技术人员。在专业技术人员与员工的努力支持下，基于汽车喷烤漆房、家具喷烤漆房基础上，本厂又开发研究推出了：各种大、中、小型，涂装流水线、喷砂房、中央除尘和多种无尘打磨台等系列喷涂设备。
我公司实力雄厚、技术先进、拥有多名工程技术人员。先进的技术和专业的人才使得产品质量得到了极大的保证。“环保、节能、提高效率、改善工作环境”是我们永恒的追求目标。专业的制造技术、优良的品质、环保喷涂，是您明智的选择!
章丘市同盛涂装设备厂
联系人：侯经理
电话：0531-83543283
传真：0531-83543283
手机：*
商务 

诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！